The rubber compensator is also called soft joints. Generally, it consists of a smooth waveform compensation element with rubber bumps on both ends and metal flange. So what is a rubber compensator? What are the widespread use of rubber compensators?
Wide use of rubber compensators:
1. The rubber compensator can greatly reduce the vibration and noise of the pipeline system, which can fundamentally solve problems such as interface displacement, axial telescopic and different heart degrees of various pipelines. According to different materials, it can be made into various types of acid resistance, alkali resistance, corrosion resistance, oil resistance, heat resistance, etc., and adapt to a variety of media and environment. The material is very sexual rubber, has good sealing, light weight, convenient installation and maintenance, and long service life, but avoid contact with sharp metal equipment to avoid piercing the sphere. If you use a matched elastic bracket, the bolt should be tightened by diagonal method when installing. If the pipeline pressure is too high, the application is very limited to the flange ends together.
2. The rubber compensator has been widely used in the desulfurization system. It is mostly used for pumps such as the slurry system pipeline, oxide system pipeline, water system pipeline and other pumps, fan inlet pipes, such as the pump of the pulp circulation pump, the pump of the slurry, the slurry, and the pump. Import and export pipelines, etc. The rubber compensator has high pressure resistance and good elasticity. It can withstand a certain amount of axial, horizontal, angular displacement, noise recall, vibration reduction, and also has the advantages of corrosion resistance and abrasion.
3. When installation, the rubber compensator cannot rotate at will. Well, the special expansion festival is suitable for the transportation of harmful gases in the chemical industry.) The rubber compensator should be equipped with the corresponding flanges and nuts, and try to favors the heart distance and hole circle of the flange. cap.
4. After the period of multiple circumference, the bolt -bolted expansion cap can perform pressure tests, and the pressure test cannot reach the standard at one time. When the pressure of the initial test was 1/3 of the prescribed pressure, the stopper pressure test was stopped to check whether the tightness of the bolts and the expansion section of the extension of each part of each ministry was the same. If there are loosening and uneven power and inconsistent contact between the contacts, the return should be adjusted in time, otherwise local leakage or destruction will occur, which will affect the normal use pressure and life of the rubber compensator.